Eco-3 Drinking Water Filter Kit (EXTRA)

with Quality Tap Fitting Kit


Advanced undercounter drinking water filter with globally patented technology. Consists of unique 2-phase filtration and treatment process.

Includes: 1 x length of tubing; 1 x saddle clamp; 1 x T piece adaptor; 1 x tap; 1 x pressure limiting valve and 2 x 6.5mm or 1/4" pushfit connectors.

Eco-Advantage: Active ceramics are naturally occuring. Remaining ceramic product can be scattered in the garden for improved soil drainage and plant growth. Filter housings can be reused/recycled at end of life.

Features and Benefits

Easy: Easy to fit. Installation instructions enclosed. Simple twist and unlock system for quick cartridge change. Full 360 degree pivot rotary plate allows positioning for more awkward locations. Patented auto shut-off valve allows for fast, dry cartridge change.
Unique: The Eco-3 is the only hygienic recyclable filter in the market today. The cartridge is sealed in a patented high tech 4 layer FDA grade protective sleeve, meaning there can be no contact with the filtration media, ensuring no contamination on replacement.
Secure: Security eye which can be secured with cable-tie by engineer or home-owner to prevent tampering.
Economical: Substantial savings as only the cartridge needs replacing; the filter housing can be used time and time again.
Healthy: Drinking water free from chlorine and other contaminants is better for you and your family's health. Tool provided to prevent cross-contamination of filter, whilst World first hygienic sleeve prevents any contact with filtration media.
Construction: High strength plastic housing with lockable collar which can withstand pressure of up to 7 bar.
Approvals: Manufactured from FDA compliant materials to NSF standards (
Warning: Meant for filtering municipal water. Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
Caution: To reduce the risk of property damage due to water leakage you must read and follow installation and use instructions before installation and use of this product. A PRV (Pressure reducing valve) MUST be installed prior to any filter where water pressure is known to climb above 100psi/7 bar.
Contaminant Removal and Reduction
Effective filtration is dependent upon normal levels of contaminants, water pressure and flow rates as recommended under Specifics table.
Chlorine, taste and odours. Up to 99%
Sediment Reduction Yes
Fluoride Reduction Up to 80%
Ceramics kill and prevent re-growth or breeding of bacteria, fungi or algae within the cartridge. Helps creates sterile environment within the filter.
The cartridge reduces cysts including Giardia and Cryptosporidium down to 1 micron in size. Cartridge will effectively remove dirt, rust and suspended matter. Removes chlorine, most organic chemical and compounds including THM's (Trihalomethanes).
Effectively reduces volatile organic compounds for clean, safe, healthy and great tasting drinking water.
Removal of pesticides, insecticides, detergents and other toxins.
Improved water clarity.
Size: 265mm x 85mm x 80mm diameter
Usage: Potable water
Flow rate: 3 litres/minute
Max pressure: 7 bar/100 psi
Life span: Up to 12 months (with normal water quality and usage)
Capacity: 8000 litres (with normal water quality and usage)
Operating temperature: 4 - 38 degrees C
Media: 1 micron carbon block, with active ceramics for additional bacterial control
Connections: 6.5mm or 1/4" connections female thread for push fit compatibility
Fitting Kit Specifics
Size: 260mm high (tap installed)
Lever: Full turn 3 spoke lever
Spout: Swivel, goose neck
Pressure valve: FMP 50psi
Connections: 6.5mm or 1/4" pushfit