1 - 3
Congratulations on the purchase of your Eco-4 Universal Portable Water Filter.
Fill in date of purchase (Installation Date) and advised replacement date on product label with a permanent marker.
Find suitable tap.
Max diameter of tap end is 19mm or 3/4 inch. Ensure that the tap has been turned off.
Attach the travel filter to the end of the tap.
The travel filter will attach to the end of the tap by way of pushing the rubber funnel over the end of the tap.
Turn the water supply on.
Slowly open the tap to allow the water to flow through the filter.
Fill desired container with the filtered water.
Turn the water tap off.
Close the tap.
Work the filter off the tap.
Keep the pressure on the top part of the rubber fitting, by placing your thumbs over the circumference of the rubber which overlaps the end of the tap. By applying even pressure the filter will simply be disconnected from the tap.
Allow the filter to drip dry in a clean location (i.e. a sink) which will allow for the excess water to drain off.
Need more help?
Please call our Technical Helpline on:
0861 474 238