1 - 3
Congratulations on the purchase of your Eco-7 Inline Fridge Filter.
Fill in date of installation and advised replacement date on product label with a permanent marker.
This is what the finalised install will look like.
Ensure that tubing is 6mm or 1/4” in diameter before starting.
If you require larger fittings, please contact our Hotline on 0861 474 231 to speak to Installation professionals who can offer alternative fittings to you.
Locate the water feed to the fridge.
This will be an external 6mm tube.
Turn water supply to this feed off.
Turn water off at isolation valve which is found where tubing connects to main plumbing supply.
Select an appropriate distance along this tube.
The Eco-7 filter has a mounting bracket supplied, allow enough slack in the tubing to mount this filter on a designated wall/inner cupboard.
Cut the above tubing.
Ensure that this tubing is in fact 6mm or 1/4 inch in diameter.
Fit tubing to this filter.
Simply push end new end of the cut tube into each end of the Eco-7.
Mount the Eco-7 onto the wall.
Simply push the Eco-7 into the mounting bracket.
Turn the water back on.
Use the isolation valve to slowly re-introduce the flow of water into the system. By doing this through incremental adjustments you can check for any leaks whilst slowly increasing pressure and flow.
Run water through system for 1 minute to flush out loose carbon and ceramic sediment.
Need more help?
Please call our Technical Helpline on:
0861 474 238